What Almost No One Knows About Toys

Flying an RC Helicopter If it is your first time to try it to fly even if you have the best RC helicopter you have to remember a few important things. Like every other real plane there should always be a pre-flight and post flight checklist you need to follow in order that your RC helicopter flies smoothly and lands safely as well. Every time you fly a helicopter, before you take it up and after you’re done flying you may want to check all of these things first. Little things like these will guarantee that you don’t have a day of just buying parts and you will have a lot of good enjoyable hours on your helicopter. Turn the radio on first then you plug in the helicopter is the most important thing is to make sure that before you fly you. It is important to note that turning on the helicopters first and then the radios which the little receiver goes into a standby mode and doesn’t link to the radio which everyone thinks they got a bad helicopter. Really all you got to remember is to turn on the remote first and you won’t have all of those problems. Plug in the helicopter which has a jar on board and don’t forget it. Make sure that as soon as you plug it in set it down on a flat surface and let it be still for a few seconds. Wait for the lights to pop on which means it is ready. Moving it around after you have just plugged it on the gyro won’t know what ‘still’ is. It should know what it means to be still by setting it down after you plugged it in. It will fly extremely and radically if you move it thinking it is what you mean of being ‘still’. It’s going to be barely flyable. Obviously, you want to fly it with a fully charged battery. Crashing it on your first flight, here is a side checklist you need to do first. First thing is your Y bar on top of the main helicopter blades should be free moving. Hitting it with your fingers it should be bouncing back and forth it only means that it is not binding. It should be able to move as freely as possible because this is what keeps your helicopter stable which is very important. If the Y bar is tight, lockdown or binding that means your helicopter is going to fly very radically.
Tips – Getting Started & Next Steps
You have to unplug the helicopter as one of the post flight things you need to remember. Turn off the radio. The helicopter should be kept in a room where the room temperature is cool and free from moist and sun exposure. Make sure to recharge the batteries for both remote control and the helicopter.
Tips – Getting Started & Next Steps
You might even hand it down to your son or your grandkids if you take care of these RCs by following both the pre-flight and post flight checklists.